 |
| |
| DCI Locators - SE |
|
| Accessories
|
|
| |
|
|
| |
SE™ Compatible Remote Displays - Mark Series Displays |
Any Mark Series remote display (Mark II, Mark III, Mark IV, and Mark V) will receive signals from the SE
receiver to display depth, pitch, roll, temperature, and left/right steering at the drill. |
|
|
|
| |
F Series Display |
The F Series Display (FSD) lets you see drilling information at the drill and can receive telemetry signals
from the F2®, Eclipse®, Mark III, and Mark V locating systems. The FSD remote display is equipped with
externally mounted antenna. Additional antenna options available upon request for increased telemetry range.
|
|
|
|
|
| |
MFDF |
The Multi-Function Display can accept and display telemetry signals from 5* different DCI manufactured
receivers: F2®, Eclipse®, SE™, Mark III, and Mark V. The MFDF unit can also be used with the Eclipse®
TensiTrak® Pullback and Pressure Monitoring system.
* to receive telemetry signal from the SE™ and F2® receivers requires an update to Gen 2. |
| |
|
|
|
| |
ST™ Transmitters - ST Transmitter |
The standard-range 12 kHz ST transmitter is rated to 50 ft (15.2m.)
The SE™ Locating System is compatible with DCI’s DucTrak™ series of transmitters (12kHz only), which are used
for tracking existing non-metallic ducts. |
| |
|
|
|
|
| |
Parts - SE™ NiMH Battery Charger |
The DCI NiMH battery charger system will power the SE™ receiver for 6 hours before recharging is necessary. |
| |
|
|
|
|
| |
|
|
Copyright © 2008. www.bluewhale.in All rights reserved. |
|
|
